Click Photo to View Full Size
Hills may have to be modified to meet the slide's 30-35 degree angle. The listed slide slope is fixed and cannot be changed.
The sliding surface shall be less than 300 mm (11.81 inches) above the ground.
A starting platform is recommended and must be less than 300 mm (11.81 inches) above the ground.
Arm clearance zones of 525 mm (20.67 inches) to the left and right of the outside edge of the slide must be free of solid objects such as rock, concrete pads, wood log steppers, etc.
Rocks and log steps are not included and are shown outside the 525 mm clearance zone.
20ft SuperSlide Full Tube Hill Slide
This 20ft high slide has a full 30 inch diameter tube with ample sliding room. It has an extended exit region. Designed for hills 20ft with a slope of 30 degrees.
*Stone steps not included, for visualization only.